 |
 |
|
|
|
|
 |
 |
U.S. Department of
Transportation
Office of the Secretary
of Transportation
Small Business Innovation Research
2002 Program Solicitation
DTRS57-02-R-SBIR
VI. Submission of Proposals
Previous Section | Program Contents | Next Section
Submittal Instructions
For hard copy submissions:
An original and four copies of each proposal submitted under the DOT SBIR Program shall be sent to:
Joseph Henebury
DOT SBIR Program Director, DTS-22
U.S. DOT/RSPA/VNTSC
55 Broadway, Kendall Square
Cambridge, MA 02142-1093
Phone: 617/494-2051
Proposals must be postmarked NO LATER than May 1, 2002 to qualify for acceptance and consideration under the current DOT SBIR Program. Proposals postmarked or received via e-mail later than May 1, 2002 will not be accepted.
Proposals delivered to the DOT SBIR Program Office by any means other than the U.S. Postal Service, must be received at the above address on or before May 1, 2002.
Electronic Submission Requirements:
- Each proposal shall not exceed 25 pages.
- All proposals must be in all text, (i.e., no graphics, tables, etc.)
- All proposals must be a PDF file attached to e-mail.
- No duplicate proposals shall be sent by any other means.
- Proposals must be sent via e-mail to: henebury@volpe.dot.gov
- Proposals must be received by 5:00p.m. on May 1, 2002.
- You must submit a completed and signed hardcopy of Appendices A, B, and C postmarked no later than May 1st to: Joseph Henebury, DOT SBIR Program Director, DTS-22, U.S. DOT/RSPA/VNTSC, 55 Broadway, Kendall Square, Cambridge, MA 02142-1093
- The proposal file shall contain eight 98) characters-the first three shall be the topic # you are proposing to, i.e., FH3, and the remaining five characters shall be a unique abbreviation of your company's name.
Your proposal will have the same protection/security as DOT e-mail. It will be available to only the team of DOT engineers and/or scientist who is responsible for evaluating your proposal.
If you intend to submit your proposal electronically you must register at our website: www.volpe.dot.gov/sbir by April 15, 2002
Additional Information
Bindings. Please do not use special bindings or covers. Staple the pages in the upper left corner of the cover sheet of the proposal with a single staple.
Packaging. All copies of the proposal shall be sent in one package together with the acknowledgement form which appears on the last page of this document.
Confirmation. The DOT SBIR Program Office will assign an identification number to each proposal received at the above address by May 21, 2002. This number will appear on the proposal acknowledgement form which will be sent to the proposer by return mail confirming receipt of the proposal.
Proposers who submitted their proposals electronically will receive their proposal number via e-mail no later than May 21, 2002.
Return to Top
|
 |
|
 |